Features
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGAinterface
Software upgrade via USB interface

Specefications
Model RY-F600H with Fiber Holders
Applicable fibers SM (ITU-T G. 652), MM (ITU-T G. 651), DS (ITU-T G. 653), NZDS (ITU-T G. 655)
Fiber cleaved length 10 ~16mm (Coating diameter< 250µ M); 16mm(Coating diameter250~1000µ M)
Fiber diameter Cladding diameter: 80 ~150µ M, Coating diameter: 100 ~1000µ M
Auto focusing Available
Fiber aligning method Core aligning, clad aligning, manual aligning
Average splice loss 0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS)
Splicing time Typical 9 sec, with standard SM fiber
Heating time Typical 36 sec
Applicable sleeves 60mm, 40mm and a series of micro sleeves
Tension test 2N(option)
Electrode life 5000
Battery capacity Typical 400 cycles (splice and heat)
Monitor 5.1 inch TFT color monitor
Terminal USB 1.1 and VGA, software upgrade via USB interface
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%RH and -10~50oCC, respectively, Max. Wind velocity of 15m/s
Splicing mode Auto, normal
Fiber cleaved angle threshold set 0.1 ~ 10.0 oC, 0.1oCstep
Power supply Li-battery 11.8V, AC100-240V DC12.6V/5.0A
Dimension L169*W152*H155mm
Weight 2.4kg 2.9kg(battery)