Features

Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGAinterface
Software upgrade via USB interface

Specefications
Model                                     RY-F600H with Fiber Holders
Applicable fibers                  SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length            10 ~16mm (Coating diameter<250µm);16mm(Coating diameter250~1000µm)
Fiber diameter                      Cladding diameter:80 ~150µm , Coating diameter:100 ~1000µm
Auto focusing                        Available
Fiber aligning method         Core aligning, clad aligning, manual aligning
Average splice loss              0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS)
Splicing time                         Typical 9 sec,with standard SM fiber
Heating time                          Typical 36 sec
Applicable sleeves               60mm, 40mm and a series of micro sleeves
Tension test                            2N(option)
Electrode life                           5000
Battery capacity                       Typical 400 cycles (splice and heat)
Monitor                                     5.1 inch TFT color monitor
Terminal                                   USB 1.1 and VGA ,   software upgrade via USB interface
Operating condition                                0 ~ 5000m above sealevel, 0 ~ 95%RH and -10~50oCC, respectively, Max. wind velocity of15m/s
Splicing mode                                           Auto ,normal
Fiber cleaved angle threshold set         0.1 ~ 10.0 oC , 0.1oCstep
Power supply                                    Li-battery 11.8V, AC100-240VDC12.6V/5.0A
Dimension                                        L169*W152*H155mm
weight                                                 2.4kg   2.9kg(battery)